Time to Prepare Your Furnace for Winter! Tips from a Furnace Service in Albany, OR

October 17, 2016 2:56 pm Published by Leave your thoughts

It’s hard to believe, but winter is just around the corner already. We still have yet to really get into the fall months, but once the cool air hits, it’s here to stay, and you must be prepared. The last thing you want is to have your furnace give out on one of the coldest days of the year!

With that in mind, here are some tips to help you prepare your furnace for winter, so you don’t have to make an emergency call to a furnace service in Albany, OR:

  • Check and change your filter: For your furnace to be operating at its peak efficiency, you need to be sure the filter is clean. The dirtier the filter, the harder the furnace will have to work, which will lead to a significant waste of energy. Additionally, dirty filters run a higher risk of polluting the air in your home. This can be especially problematic if you or anyone in your family has allergies or respiratory problems.
  • Switch your thermostat from cooling to heating: This might seem a bit obvious, but you’d be surprised at how many people forget to perform this simple task. Obviously, your furnace isn’t going to heat your home unless you have told it to do so with your thermostat.
  • Inspect your chimney: Before the weather gets cold, take some time to check your chimney for any potential obstructions, such as debris or bird nests. Make sure there is not a significant amount of soot built up inside the chimney, as this could be a fire hazard. If you believe a cleaning is necessary, call a professional to come in and inspect and clean the ducts.
  • Make sure burners are clear: Dust can accumulate on the burners during the summer. It’s extremely important to check and clean these burners before the cold season sets in. Dust on the burners can cause them to overheat and become a fire hazard. While you are cleaning off the burners, make sure there are no signs of rust or misalignment.
  • Oil the blower: All components of your heating system should be in good working order before you begin using it for the cold season. One of these components is the blower motor. If it makes unusual noises when you start it up, you probably need to have it oiled.
  • Test your thermostat: Your thermostat should be working properly. If it is not, there could be a number of problems with your system. Your furnace might not be working efficiently, or there could be some sort of electrical problem in your thermostat itself.
  • Uncover heating vents: Again, this might seem obvious, but it’s a step that’s easily forgotten when beginning to heat your home for the first time during the fall.

It’s best to make your appointment for cleanings and maintenance early in the season, as the colder it gets, the more people will begin seeking HVAC specialists. For more information about preparing your furnace for winter, contact Larsell Mechanical Service, your trusted furnace service in Albany, OR, today.

Categorised in:

This post was written by admin

Leave a Reply

Your email address will not be published. Required fields are marked *